Chevrolet VENTURE 2001 Manual Download Page 387

Page: 387 / 460

6-36

9. Align the pins on the bottom of the headlamp

assembly with the holes in the lamp support bracket
while placing the holes in the assembly over the
bolts where the wing nuts attach.

10. Reinstall and tighten the wing nuts.

11. Reinstall the front turn signal/parking lamp

assembly by lining up the tabs at the back of the
assembly with the holes in the fender and tighten
the thumbscrew.

Be sure the tab from the front turn signal/parking
lamp assembly is inboard of the tab from the
headlamp assembly.

Front Turn Signal/Parking Lamps

To replace the front turn signal/parking lamp bulb(s) do
the following:

1. Open the hood.

2. Remove the thumbscrew attaching the front

turn signal/parking lamp assembly to the
headlamp assembly.

3. Pull the front turn signal/parking lamp assembly

away from the vehicle.

Summary of Contents for VENTURE 2001












































































































































































































































































































































































































































































Search results

Summary of Contents for VENTURE 2001

Reviews:

Chevrolet VENTURE 2001, Manual, Page: 387 / 460

Search results

Summary of Contents for VENTURE 2001

Reviews: