manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 107 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 107

1-95

4. Buckle the belt. Make sure the release button is

positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

5. Some vehicles have a child restraint locking feature

on the shoulder belt retractor. You can tell if your
vehicle has this feature by pulling the shoulder belt
all the way out of the retractor. Then, let the belt go
back a few inches, and try to pull the belt out again.
If you can’t pull the belt out because it has locked, 
it means the retractor has the child restraint locking
feature. If the belt doesn’t lock and you can pull the
belt out of the retractor again, it means your vehicle
doesn’t have the child restraint locking feature on the
shoulder belt retractor.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments