manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 224 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 224

2-111

Low Oil Pressure Message

United States

Canada

Your vehicle is equipped with a low oil pressure
warning warning message.

Your oil pressure message lets you know when you may
have a problem with your engine oil pressure.

When the engine is running and this message appears
on, the engine oil level may be too low. There may also
be another problem causing low oil pressure.

CAUTION:

Don’t keep driving if the oil pressure is low. If
you do, your engine can become so hot that it
catches fire. You or others could be burned.
Check your oil as soon as possible and have your
vehicle serviced.

NOTICE:

Damage to your engine from neglected oil
problems can be costly and is not covered by 
your warranty.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments