manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 165 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 165

2-52

FIRST (1): This position gives you even more 
power (but lower fuel economy) than SECOND (2). 
You can use it on very steep hills, or in deep snow or
mud. If the selector lever is put in FIRST (1), the
transaxle won’t downshift into first gear until the vehicle
is going slow enough.

NOTICE:

If your front wheels can’t turn, don’t try to drive.
This might happen if you were stuck in very deep
sand or mud or were up against a solid object.
You could damage your transaxle.

Also, if you stop when going uphill, don’t hold
your vehicle there with only the accelerator
pedal. This could overheat and damage the
transaxle. Use your brakes or shift into PARK (P)
to hold your vehicle in position on a hill.

Parking Brake

The parking brake is located
on the driver’s side under
the instrument panel.

To set the parking brake, hold the regular brake pedal
down with your right foot and push down on the parking
brake pedal with your left foot.

If the ignition is on, the brake system warning light will
come on. See “Brake System Warning Light” in the Index.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments