manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 217 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 217

2-104

Malfunction Indicator Lamp (Service
Engine Soon Light in the United States or
Check Engine Light in Canada)

United States

Canada

Your vehicle is equipped with a computer which
monitors operation of the fuel, ignition and emission
control systems.

This system is called OBD II 
(On

-

Board Diagnostics

-

Second Generation) 

and is intended to assure that emissions are at acceptable
levels for the life of the vehicle, helping to produce a
cleaner environment. The SERVICE ENGINE SOON or
CHECK ENGINE light comes on to indicate that there
is a problem and service is required. Malfunctions often
will be indicated by the system before any problem is
apparent. This may prevent more serious damage to
your vehicle. This system is also designed to assist 
your service technician in correctly diagnosing 
any malfunction.

NOTICE:

If you keep driving your vehicle with this light
on, after a while, your emission controls may not
work as well, your fuel economy may not be as
good and your engine may not run as smoothly.
This could lead to costly repairs that may not be
covered by your warranty.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments