Chevrolet VENTURE 2001 Manual Download Page 16 | Manualshive

Page: 16 / 460

Chevrolet VENTURE 2001 Manual Download Page 16

1-4

6-Way Power Seat (Option)

The six

-

way power seat

controls are located on
the outboard side of the
driver’s seat.

D Move the front of the control in the direction of the

arrows to adjust the front portion of the cushion up
or down.

D Move the rear of the control in the direction of the

arrows to adjust the rear portion of the cushion up
or down.

D Lift up or push down on both outer arrows at the

same time to move the entire seat up or down.

D To move the whole seat forward or rearward, slide

the control in the direction of the center arrows.

Reclining Front Seatbacks

All front seats recline.

To adjust the seatback, pull up on the lever located on
the outboard sides of both the driver’s and the front
passenger’s seats. It is easier to recline the seat if you
lean forward, taking your weight off the seatback.

«
...
14
15
16
17
18
...
»

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments