manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 312 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 312

4-34

Weight of the Trailer

How heavy can a trailer safely be?

It should never weigh more than 1,400 lbs. (630 kg)
with up to six occupants in the vehicle or more than
2,000 lbs. (900 kg) with up to two occupants. If you
have the optional trailer towing package, your vehicle
can tow up to 2,900 lbs. (1 300 kg) with up to 
six occupants or up to 3,500 lbs. (1 575 kg) with 
up to two occupants. But even that can be too heavy.

It depends on how you plan to use your rig. For example,
speed, altitude, road grades, outside temperature and 
how much your vehicle is used to pull a trailer are all
important. And, it can also depend on any special
equipment that you have on your vehicle.

You can ask your dealer for our trailering information or
advice, or you can write us at:

Chevrolet Customer Assistance Center
P.O. Box 33170
Detroit, MI  48232

-

5170

In Canada, write to:

General Motors of Canada Limited
Customer Communication Centre, 163

-

005

1908 Colonel Sam Drive
Oshawa, Ontario L1H 8P7

Weight of the Trailer Tongue

The tongue load (A) of any trailer is an important
weight to measure because it affects the total or gross
weight of your vehicle. The Gross Vehicle Weight
(GVW) includes the curb weight of the vehicle, any
cargo you may carry in it, and the people who will be
riding in the vehicle. And if you will tow a trailer, you
must add the tongue load to the GVW because your
vehicle will be carrying that weight, too. See “Loading
Your Vehicle” in the Index for more information about
your vehicle’s maximum load capacity.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments