manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 145 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 145

2-32

The driver’s side sliding door is designed to open only a
little if the fuel door is open. If this ever happens, don’t
try to force the sliding door. Just close the driver’s side
sliding door. Then when the fuel filler door is closed, the
driver’s side sliding door can be opened normally.

CAUTION:

You or others could be injured if caught in the
path of the sliding door. Make sure the door path
is clear before closing the door.

If you want to open the power sliding door(s) when the
override switch(es) is turned off, pull the inside or
outside handle and let go. The door will open fully.

To open the power sliding door(s) when the override
switch(es) is on, pull the inside or outside handle and
slide the door all the way back.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments