manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 326 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 326

5-9

Engine Overheating

You will find an engine coolant temperature gage on 
the instrument panel cluster. See “Engine Coolant
Temperature Gage” in the Index. You also have an
engine coolant temperature warning message on the
instrument panel cluster. See “Engine Coolant
Temperature Warning Message” in the Index.

Overheated Engine Protection 
Operating Mode

This emergency operating mode allows your vehicle 
to be driven to a safe place in an emergency situation.
Should an overheated engine condition exist, an
overheat protection mode which alternates firing groups
of cylinders helps prevent engine damage. In this mode,
you will notice a significant loss in power and engine
performance. The temperature gage will indicate an
overheat condition exists. Towing a trailer in the
overheat protection mode should be avoided.

NOTICE:

After driving in the overheated engine protection
operating mode, to avoid engine damage, allow
the engine to cool before attempting any repair.
The engine oil will be severely degraded. Repair
the cause of coolant loss and change the oil. 
See “Engine Oil” in the Index.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments