manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 228 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 228

2-115

PASS-Key

R

 III Security Message

United States

Canada

If you are ever driving and this message comes on and
stays on, you will be able to restart your engine if you
turn it off.

Your PASS

-

Key III system, however, is not working

properly and must be serviced by your dealer. Your
vehicle is not protected by the PASS

-

Key III system 

at this time. See “PASS

-

Key III” in the Index for 

more information.

Low Fuel Warning Message

United States

Canada

If your fuel is low, the warning message will come on
and stay on until you add fuel.

If the warning message is still on after adding fuel, you
need to reset the warning message. To reset the warning
message, turn the ignition to OFF then to ON. If the
message stays on, see your dealer right away.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments