manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 384 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 384

6-33

CAUTION:

Batteries have acid that can burn you and gas
that can explode. You can be badly hurt if you
aren’t careful. See “Jump Starting” in the Index
for tips on working around a battery without
getting hurt.

Contact your dealer to learn how to prepare your vehicle
for longer storage periods.

Also, for your audio system, see “Theft

-

Deterrent

Feature” in the Index.

Bulb Replacement

For the type of bulbs, see “Replacement Bulbs” in 
the Index.

For any bulb changing procedure not listed in this
section, contact your dealer’s service department.

Halogen Bulbs

CAUTION:

Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.

Headlamps

To replace the headlamp bulb(s) do the following:

1. Open the hood.

2. Remove the front turn signal/parking lamp assembly.

See “Front Turn Signal/Parking Lamps” later in 
this section.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments