Chevrolet VENTURE 2001 Manual Download Page 389

Page: 389 / 460

6-38

Front Sidemarker

To replace the front sidemarker bulb(s) do
the following:

1. Open the hood.

2. Remove the thumb screw attaching the front

turn signal/parking lamp assembly to the
headlamp assembly.

3. Pull the front turn signal/parking lamp assembly

away from the vehicle.

4. Unscrew the bulb socket from the lamp assembly by

turning it counterclockwise.

5. Replace the bulb by pulling the old one out and

gently pushing the new one into the lamp socket.

6. Line up the tabs on the sockets with the gaps in the

socket holes and screw the bulb socket back into the
lamp housing.

Summary of Contents for VENTURE 2001












































































































































































































































































































































































































































































Search results

Summary of Contents for VENTURE 2001

Reviews:

Chevrolet VENTURE 2001, Manual, Page: 389 / 460

Search results

Summary of Contents for VENTURE 2001

Reviews: