manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 365 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 365

6-14

What Kind of Engine Oil to Use

Oils recommended for your vehicle can be identified by
looking for the starburst symbol.

This symbol indicates that the oil has been certified by
the American Petroleum Institute (API). Do not use any
oil which does not carry this starburst symbol.

If you change your own oil,
be sure you use oil that has
the starburst symbol on the
front of the oil container. If
you have your oil changed
for you, be sure the oil put
into your engine is
American Petroleum
Institute certified for
gasoline engines.

You should also use the proper viscosity oil for your
vehicle, as shown in the following chart:

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments