manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 349 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 349

5-32

6. Make sure the tire is stored securely. Push, pull, and

then try to rotate or turn the tire. If the tire moves,
use the folding wrench to tighten the cable.

Put back all jacking tools as they were stored in the jack
storage compartment and put the compartment cover
back on.

To put the cover back on, line up the tabs on the right of
the cover with the slots in the cover opening. Push the
cover in place and push down the tab so that it rests in
the groove. This secures the cover in place.

A. Strap

B. Bag and Tools

C. Jack

Unless you have the plastic “bolt

-

on” wheel covers, be

sure to also store the center cap. When you replace the
compact spare with a full

-

size tire, reinstall the bolt

-

on

wheel covers and the center cap. Tighten them “hand
tight” over the wheel nuts, using the folding wrench.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments