manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 106 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 106

1-94

Although a rear seat is a safer place, you can secure a
forward

-

facing child restraint in the right front seat.

You’ll be using the lap

-

shoulder belt. See the earlier 

part about the top strap if the child restraint has one. 
Be sure to follow the instructions that came with the
child restraint. Secure the child in the child restraint
when and as the instructions say.

1. Because your vehicle has a right front passenger air

bag, always move the seat as far back as it will go
before securing a forward

-

facing child restraint. 

See “Seats” in the Index.

2. Put the restraint on the seat.

3. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.

Tilt the latch plate to adjust the belt if needed.

If the shoulder belt goes in front of the child’s face or
neck, put it behind the child restraint.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments