manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 238 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 238

3-5

Rear Window Defogger (If Equipped)

Press the REAR button 
(the light will glow) to
warm the defogger grid 
on the rear window and to
turn on the heated outside
rearview mirrors.

The system will turn off automatically after about 
10 minutes of use. If you turn it on again, the defogger
will operate for about five minutes. You can also turn
the defogger off by turning off the ignition or by
pressing the button again.

Do not attach a temporary vehicle license across the
defogger grid on the rear window.

NOTICE:

Don’t use a razor blade or something else sharp
on the inside of the rear window. If you do, you
could cut or damage the warming grid, and the
repairs wouldn’t be covered by your warranty.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments