Home
/
Chevrolet
/
VENTURE 2001
/
Manual

Chevrolet VENTURE 2001, Manual, Page: 142 / 460

Share

Page: 142 / 460

Chevrolet VENTURE 2001 Manual Download Page 142

2-29

If you have the optional
power sliding door, this
switch is located in
the overhead
console switchbank.

These switches are located
in the overhead console
switchbank, if you have
the optional dual power
sliding doors.

The power sliding door and the power sliding door
override is one switch. The left switch is for the driver’s
side power sliding door and the right switch is for the
passenger’s side sliding door.

Pushing the bottom of the switch(es) turns the power to
the sliding door(s) off. When the power sliding door(s)
is off, you will not be able to open the door(s) in the
following ways:
D When using the power sliding door switch(es)

located on the overhead console switchbank,

D when using the wall

-

mounted switch in front of the

driver’s or passenger’s sliding door, or

D when using the optional remote keyless entry transmitter.

NOTICE:

When your vehicle goes through an automatic
car wash, be sure the power sliding door is
turned off. If it isn’t, the power sliding door may
open accidentally.

«
...
140
141
142
143
144
...
»

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments