manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 203 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 203

2-90

OnStar System Limitations

Complete limitations can be found on the Subscriber
Services Agreement.

OnStar Service is:
D Available in the 48 contiguous United States, Alaska,

Hawaii and Canada;

D available when the vehicle is within the operating

range of a cellular provider;

D subject to limitations caused by atmospheric

conditions, such as severe weather or topographical
conditions, such as mountainous terrain;

D subject to cellular carrier equipment limitations.
Global positioning capabilities used to deliver OnStar service
will not be available if satellite signals are obstructed.

OnStar will not function if the vehicle’s battery is
discharged or disconnected. It may also be inoperative if
the vehicle is in an accident and the OnStar or vehicle
electrical system components are damaged.

Safety and security services are provided by existing
governmental emergency service providers. OnStar will
use reasonable efforts to contact the appropriate
emergency service provider and request assistance but
cannot promise that they will respond to the call in a
timely manner or at all.

HomeLink

R

 Transmitter (Option)

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and 
(2) this device must accept any interference received,
including interference that may cause undesired operation.

This device complies with RSS

-

210 of Industry Canada.

Operation is subject to the following two conditions: 
(1) this device may not cause interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation of the device.

Changes and modifications to this system by other than
an authorized service facility could void authorization to
use this equipment.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments