manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 103 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 103

1-91

Securing a Child Restraint in the Center
Seat Position (Bucket Seat)

You’ll be using the lap belt. See the earlier part about
the top strap if the child restraint has one. Be sure to
follow the instructions that came with the child restraint.
Secure the child in the child restraint when and as the
instructions say.

1. Put the restraint on the seat.

2. Pull the lap belt all the way out without stopping.

3. While holding it out, run the belt through or around

the child restraint. The child restraint instructions
will show you how.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments