manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 254 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 254

3-21

PUSHBUTTONS: The six numbered pushbuttons let
you return to your favorite stations. You can set up to 
18 stations (six AM, six FM1 and six FM2) by
performing the following steps:

1. Turn the radio on.

2. Press AM FM to select the band.

3. Tune in the desired station.

4. Press AUTO TONE to select the equalization that

best suits the type of station selected.

5. Press and hold one of the six numbered buttons. 

The radio will beep once to confirm. Whenever you
press that numbered button, the station you set will
return and the AUTO TONE equalization that you
selected will also be automatically selected for 
that button.

6. Repeat the steps for each pushbutton.

P SCAN: Press and hold one of the arrows for more
than two seconds. The radio will beep once to confirm.
Use P SCAN to listen to each of your favorite stations
stored on your pushbuttons for a few seconds.

The radio will scan through each of the stations stored
on your pushbuttons, except those stations with 
weak reception. The auto tone setting stored for that
pushbutton will be automatically chosen. Press P SCAN
or one of the pushbuttons again to stop scanning. SCAN
will be displayed whenever the tuner is in the preset
scan mode. The channel number (P1 through P6) will
appear with the frequency. In FM mode, this function
will scan through the current band such as FM1 or FM2.

Setting the Tone

BASS: Press and release the P

-

TYPE LIST/AUDIO

knob until BASS appears on the display. Then turn the
knob clockwise to increase bass and counterclockwise 
to decrease bass. The display will show the bass level.
When you use this control, the radio’s auto tone setting
will switch to manual. To set bass to the middle position,
select the control and press and hold the P

-

TYPE

LIST/AUDIO knob. The radio will produce one beep
and set the display level to the middle position. To set all
tone and speaker controls to the middle position, press
and hold the P

-

TYPE LIST/AUDIO knob when no 

tone or speaker control is active. The radio will produce
one beep and display ALL with the level display in the
middle position.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments