manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 416 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 416

6-65

Fuses

Usage

43

Not Used

44

Retained Accessory Power 
(RAP) Relay

45

Not Used

46

Air Inlet Actuator, DIC Display,
DRL Control Module, Heater

-

A/C

Control, Temperature Door
Actuator (Front) and Rear
Window Defogger Relay

47

BCM Programming

48

Not Used

49

Not Used

50

IGN MAIN Relay and PCM,
Electronic Break Control Module

Underhood Fuse and Relay Center

This fuse and relay center is
located in the engine
compartment, in front of the
windshield washer fluid
reservoir. See “Engine
Compartment Overview” in
the Index for more
information on location.

The fuses marked spare are available if a replacement
fuse is needed.

To remove the cover, turn the knob counterclockwise
and lift up. Remove the cover.

When finished, put the cover back on and turn the knob
clockwise. Make sure that the remote positive (+)
terminal cover is on correctly.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments