manualshive.com logo in svg

Chevrolet VENTURE 2001, Manual, Page: 427 / 460

Share
Download
Chevrolet VENTURE 2001 Manual Download Page 427

Scheduled Maintenance

7-6

Engine Oil and Chassis Lubrication
Scheduled Maintenance

Change engine oil and filter as indicated by the 
GM Oil Life System

t (or every 12 months,

whichever occurs first). Reset the system. The system
will show you when to change the oil 

--

 usually between

3,000 miles (5 000 km) and 10,000 miles (16 000 km)
since your last oil change. Under severe conditions, the
indicator may come on before 3,000 miles (5 000 km).
Never drive your vehicle more than 10,000 miles 
(16 000 km) or 12 months without an oil and 
filter change.

The system won’t detect dust in the oil. So if you drive
in a dusty area, be sure to change your oil and filter
every 3,000 miles (5 000 km) or sooner if the change
engine oil message appears. Remember to reset the 
Oil Life System when the oil and filter have been
changed. See “Oil Life System” in the Index for
information on resetting.

An Emission Control Service.

Lubricate chassis components with each engine oil and
filter change. Lubricate the suspension, steering linkage,
transaxle shift linkage, parking brake cable guides and
the underbody contact points and linkage.

Summary of Contents for VENTURE 2001













































































































































































































































































































































































































































































Reviews:

No comments