manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 90 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 90

2-26

4. With your preference displayed, press the TUNE

DISP button to select. A chime will be heard to
verify the new setting. The new selection will be
displayed with an asterisk (*) for one second.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

ORIG. SET (Return to the Original Settings): 
This feature allows you to return all customization
feature settings back to their original factory settings. 
To reset do the following:

1. Scroll, using the SEEK PSCAN up or down arrows,

until ORIG. SET appears on the display.

2. Press the 1 PREV or 2 NEXT button to enter the

submenu. SET ALL will appear.

3. With your preference displayed, press the TUNE

DISP button to select. A chime will be heard to
verify the new setting. The new selection will be
displayed with an asterisk (*) for one second.

The original factory settings are now reset. You can
either exit the programming mode by following the
instructions later in this section or program the next
feature available on your vehicle.

FOB PROG (Remote Keyless Entry Transmitter
Programming): This feature allows you to match 
the remote keyless entry transmitter to your vehicle. 
To match the transmitter do the following:

1. Scroll, using the SEEK PSCAN up or down arrows,

until FOB PROG appears on the display.

2. Press the 1 PREV or 2 NEXT button to enter the

submenu. BEGIN will be displayed.

3. Press the TUNE DISP button to start programming.

When the message PUSH FOB flashes, press and
hold the LOCK and UNLOCK buttons on the first
transmitter at the same time for 15 seconds. A chime
will be heard to verify the transmitter is learned.

4. Repeat Step 3 for each additional transmitter.

The transmitter is programmed now. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

EXIT (Exit Feature Customization Mode): This
feature allows you to exit the vehicle customization
programming. To exit do the following:
D Scroll until EXIT appears on the display.
D Press the TUNE DISP button to exit programming.

A chime will be heard to verify the exit.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments