manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 157 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 157

2-93

Low Washer Fluid

United States

Canada

This message is displayed when the vehicle is low on
windshield washer fluid.

The message is only displayed for 60 seconds at the 
start of each ignition cycle. For more information see,
“Windshield Washer Fluid” in the Index.

When the ignition is turned off, this message will be
displayed again for three seconds to remind you that
your washer fluid is low. Be sure to refill the washer
fluid tank right away.

Low Tire Pressure

United States

Canada

The low tire pressure system monitors the inflation
pressure of the tires.

After the system has learned tire pressure with properly
inflated tires, the LOW TIRE PRESSURE message will
be displayed and four warning chimes will sound if the
pressure in one tire becomes 12 psi (83 kPa) lower than
the other three tires.

When you have checked the tire pressures, be sure to
reset the tire inflation monitor. See “Tires” in the Index.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments