manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 149 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 149

2-85

United States

Canada

This message is displayed in the message center 
when the engine oil pressure is low. A chime will 
sound continuously, also.

If this occurs, you should have your vehicle 
serviced immediately.

CAUTION:

Don’t keep driving if the oil pressure is low. 
If you do, your engine can become so hot that it
catches fire. You or others could be burned.
Check your oil as soon as possible and have your
vehicle serviced.

NOTICE:

Damage to your engine from neglected oil
problems can be costly and is not covered by 
your warranty.

Cruise Light (If Equipped)

The CRUISE light comes
on whenever you set your
cruise control. See “Cruise
Control” in the Index.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments