Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 51 | Manualshive

Page: 51 / 387

Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 51

1-45

In Canada, the law requires that forward

-

facing

child restraints have a top strap, and that the strap be
anchored. In the United States, some child restraints also
have a top strap. If your child restraint has a top strap,
it should be anchored.

Anchor the top strap to one of the following anchor
points. Be sure to use an anchor point located on the
same side of the vehicle as the seating position where
the child restraint will be placed.

Once you have the top strap anchored, you’ll be ready
to secure the child restraint itself. Tighten the top
strap when and as the child restraint manufacturer’s
instructions say.

Your vehicle has top strap anchors already installed for
the rear seating positions. You’ll find them behind the
rear seat on the filler panel.

«
...
49
50
51
52
53
...
»

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments