manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 83 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 83

2-19

D Remote Keyless Entry Transmitter Programming

(Available with Remote Keyless Entry)

D Return to Original Factory Settings 

(Available for All)

D Exit Vehicle Customization Mode
Entering Programming Mode: To reset or customize
the features, you must first enter the vehicle
customization main menu. To enter the main menu, do
the following:

1. Turn the ignition to ACC or ON. The radio must 

be off.

2. Press and hold the TUNE DISP button on the 

radio for at least five seconds until SETTINGS 
is displayed.

3. Press the SEEK PSCAN up or down arrows to scroll

through each available feature on your main menu.

4. Press the 1 PREV or 2 NEXT buttons to scroll

through the lower menu. An asterisk (*) will appear
next to the item that is the current setting.

The following information shows how to reset or
customize features after entering the main menu:

SETTINGS 

--

 Display Current Settings

OIL LIFE (Oil Life System Reset): This feature
allows you to reset the GM Oil Life System

t Monitor

after an oil change. See “Engine Oil” in the Index. 
Be careful not to reset the OIL LIFE system accidentally
at any time other than when the oil has been changed. 
It can’t be reset accurately until the next oil change. 
To clear the CHANGE ENGINE OIL light from the
instrument panel cluster and reset the oil life system, 
do the following:

1. Scroll, using the SEEK PSCAN up or down arrows,

until OIL LIFE appears on the display.

2. Press the 1 PREV or 2 NEXT button to enter the

submenu. RESET will then be displayed.

3. Press the TUNE DISP button to reset. A chime will

be heard to verify the new setting and DONE will be
displayed for one second.

The CHANGE ENGINE OIL light is now reset. You 
can either exit the programming mode by following the
instructions later in this section or program the next
feature available on your vehicle.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments