Home
/
Chevrolet
/
2002 Monte Carlo
/
Owner'S Manual

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 142 / 387

Share

Page: 142 / 387

Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 142

2-78

Brake System Warning Light

Your vehicle’s hydraulic brake system is divided into
two parts. If one part isn’t working, the other part can
still work and stop you. For good braking, though, you
need both parts working well.

If the warning light comes on, there is a brake problem.
The LOW BRAKE FLUID message in the message
center will also appear when there is a brake problem.
See “Low Brake Fluid Message” in the Index. Have
your brake system inspected right away.

United States

Canada

This light should come on briefly when you turn
the ignition key to ON. If it doesn’t come on then,
have it fixed so it will be ready to warn you if there’s
a problem.

If the light comes on while you are driving, pull off the
road and stop carefully. You may notice that the pedal is
harder to push. Or, the pedal may go closer to the floor.
It may take longer to stop. If the light is still on, have
the vehicle towed for service. See “Anti

-

Lock Brake

System Warning Light” and “Towing Your Vehicle” in
the Index.

CAUTION:

Your brake system may not be working properly
if the brake system warning light is on. Driving
with the brake system warning light on can lead
to an accident. If the light is still on after you’ve
pulled off the road and stopped carefully, have
the vehicle towed for service.

When the ignition is on, the brake system warning light
will also come on when you set your parking brake.
The light will stay on if your parking brake doesn’t
release fully. If it stays on after your parking brake is
fully released, it means you have a brake problem.

«
...
140
141
142
143
144
...
»

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments