manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 87 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 87

2-23

FOB HORN (Remote Audible Verification): This
feature allows the horn to chirp when the remote keyless
entry transmitter is used to lock or unlock the vehicle.

Programmable Modes

Mode 1: OFF 

--

 Turns feature off.

Mode 2: PARTIAL 

--

 One chirp for each remote LOCK

command/no chirp for remote UNLOCK command.

Mode 3: FULL 

--

 One chirp for each remote 

LOCK command/two chirps for the first remote
UNLOCK command.

Before your vehicle was shipped from the factory, it was
programmed to Mode 1. The mode to which the vehicle
was programmed may have been changed since it left
the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:

1. Scroll, using the SEEK PSCAN up or down arrows,

until FOB HORN appears on the display.

2. Press the 1 PREV or 2 NEXT button to enter 

the submenu. The current selection will have an
asterisk (*) next to it. If you do not wish to 
change the current mode, you can either exit the
programming mode by following the directions later
in this section or program the next feature available
on your vehicle.

3. Scroll, using the 1 PREV or 2 NEXT buttons,

through the modes to change the current mode.

4. With your preference displayed, press the TUNE

DISP button to select. A chime will be heard to
verify the new setting. The new selection will be
displayed with an asterisk (*) for one second.

If your vehicle has the optional content theft

-

deterrent

system, the first time the remote UNLOCK command 
is received three chirps will be heard to indicate an
alarm condition has occurred since last arming. See
“Content Theft

-

Deterrent System” in the Index.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments