manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 172 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 172

3-9

5. Press and hold one of the six numbered pushbuttons.

The radio will produce one beep. Whenever you
press that numbered pushbutton, the station you set
will return and the bass and treble equalization that
you selected will also be automatically selected for
that pushbutton.

6. Repeat the steps for each pushbutton.

Setting the Tone (Bass/Treble)

AUDIO: Push and release the AUDIO knob until 
BASS or TREB appears on the display. Then turn 
the knob clockwise or counterclockwise to increase or
decrease. The display will show the bass or treble level.
If a station is weak or noisy, you may want to decrease
the treble.

To adjust bass and treble to the middle position, push
and hold the AUDIO knob. The radio will produce one
beep and adjust the display level to the middle position.

To adjust all tone and speaker controls to the middle
position, push and hold the AUDIO knob when no tone
or speaker control is displayed. The radio will produce
one beep and display ALL. The bass and treble will be
adjusted to the middle position.

AUTO TONE: This feature allows you to choose bass
and treble equalization settings designed for
country/western, jazz, talk, pop, rock and classical stations.

Each time you press the AUTO TONE button, this
feature will switch to one of these program types.

To return the bass and treble to the manual mode, 
push and release the AUDIO knob until the display 
goes blank.

Adjusting the Speakers (Balance/Fade)

AUDIO: To adjust the balance between the right 
and left speakers, push and release the AUDIO knob
until BAL appears on the display. Turn the knob
clockwise to move the sound to the right speakers and
counterclockwise to move the sound to the left speakers.

To adjust the fade between the front and rear speakers,
push and release the AUDIO knob until FADE appears
on the display. Turn the knob clockwise to move the
sound to the front speakers and counterclockwise to
move the sound to the rear speakers.

To adjust the balance and fade to the middle position,
push the AUDIO knob, then push it again and hold it
until you hear one beep. The balance and fade will be
adjusted to the middle position and the display will
show the speaker balance.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments