manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 256 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 256

5-16

The coolant recovery tank is located in the engine
compartment on the passenger’s side of the vehicle. 
See “Engine Compartment Overview” in the Index 
for more information on location.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

When the coolant in the coolant recovery tank is at the
COLD mark, start your vehicle.

If the overheat warning continues, there’s one more
thing you can try. You can add the proper coolant
mixture directly to the radiator, but be sure the cooling
system is cool before you do it.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments