manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 349 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 349

7-2

Have you purchased the GM Protection Plan? The Plan
supplements your new vehicle warranties. See your
Warranty and Owner Assistance booklet or your 
dealer for details. 

Introduction

Your Vehicle and the Environment

Proper vehicle maintenance not only helps to keep your
vehicle in good working condition, but also helps the
environment. All recommended maintenance procedures
are important. Improper vehicle maintenance can even
affect the quality of the air we breathe. Improper fluid
levels or the wrong tire inflation can increase the level
of emissions from your vehicle. To help protect our
environment, and to keep your vehicle in good
condition, please maintain your vehicle properly.

Maintenance Requirements

Maintenance intervals, checks, inspections and
recommended fluids and lubricants as prescribed in 
this manual are necessary to keep your vehicle in good
working condition. Any damage caused by failure to
follow recommended maintenance may not be covered
by warranty.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments