manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 113 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 113

2-49

Passing Another Vehicle While Using Cruise Control

Use the accelerator pedal to increase your speed. When
you take your foot off the pedal, your vehicle will slow
down to the cruise speed you set earlier.

Using Cruise Control on Hills

How well your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may have to step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down. Of course, applying the brake
takes you out of cruise control. Many drivers find this to
be too much trouble and don’t use cruise control on
steep hills.

Ending Cruise Control

There are two ways to cancel the cruise control:
D Step lightly on the brake pedal.
D Press CRUISE ON/OFF on the steering wheel.

Erasing Cruise Speed Memory

When you turn off the cruise control or the ignition,
your cruise control set speed memory is erased.

Exterior Lamps

The exterior lamp control is located on the instrument
panel, to the left of the steering wheel.

It controls the following systems:
D Headlamps
D Taillamps
D Parking Lamps
D License Lamps
D Instrument Panel Lights

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments