manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 305 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 305

6-29

Adding Coolant

If you need more coolant, add the proper DEX

-

COOL

R

coolant mixture at the coolant recovery tank, but be
careful not to spill it.

If the coolant recovery tank is completely empty, add
coolant to the radiator. See “Engine Overheating” 
in the Index.

CAUTION:

Turning the radiator pressure cap when the
engine and radiator are hot can allow steam and
scalding liquids to blow out and burn you badly.
With the coolant recovery tank, you will almost
never have to add coolant at the radiator. Never
turn the radiator pressure cap 

--

 even a little 

--

when the engine and radiator are hot.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol,
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

Occasionally check the coolant level in the radiator. 
For information on how to add coolant to the radiator,
see “Cooling System” in the Index.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments