manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 10 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 10

1-4

Heated Front Seat (Option)

If your vehicle has this 
this option, the switches 
that control the seats
temperature are located 
on the center console.

There are two settings, LO and HI.

Press LO to warm the seat to a lower temperature. Press
HI to warm the seat to a higher temperature. To turn this
feature off, move the switch to the center position.

Reclining Front Seatbacks

Lift the lever to release the seatback, then move 
the seatback to where you want it. Release the lever 
to lock the seatback in place. Pull up on the lever
without pushing on the seatback, and the seatback 
will move forward.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments