manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 107 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 107

2-43

Horn

Press at or near the horn symbols on your steering wheel
pad to sound the horn.

Tilt Wheel

A tilt steering wheel allows you to adjust the steering
wheel before you drive. You can raise it to the highest
level to give your legs more room when you exit and
enter. The lever to adjust it is located on the left side of
the steering column.

To adjust the wheel, hold
the steering wheel and 
pull the lever. Move the
steering wheel to a
comfortable position, 
and release the lever to 
lock the wheel into place.

Turn Signal/Multifunction Lever

The lever located on the left side of the steering column
includes the following:
D Turn Signal and Lane

-

Change Signals

D Headlamp High/Low

-

Beam Changer

D Flash

-

to

-

Pass Feature

D Windshield Wipers
D Windshield Washer
For information on the exterior lamps, see “Exterior
Lamps” later in this section.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments