manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 101 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 101

2-37

Parking Brake

The parking brake is 
located to the left of the
brake pedal, near the
driver’s door.

To set the parking brake, hold the brake pedal down
with your right foot. Push down the parking brake 
pedal with your left foot.

To release the parking brake, hold the brake pedal down
with your right foot and push the parking brake pedal with
your left foot. When you lift your left foot, the parking
brake pedal will follow it to the released position.

A warning chime will sound if the parking brake is set,
the ignition is on and the shift lever is not in PARK (P).

NOTICE:

Driving with the parking brake on can cause
your rear brakes to overheat. You may have to
replace them, and you could also damage other
parts of your vehicle.

If you are towing a trailer and parking on any hill, see
“Towing a Trailer” in the Index. That section shows
what to do first to keep the trailer from moving.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments