manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 159 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 159

2-95

Highbeam Out

 United States

Canada

If this message appears, you may have a problem with
your high

-

beam headlamps.

The message will stay on approximately 60 seconds.
When the ignition is turned off, this message will be
displayed again for three seconds to remind you that you
may have a problem with your highbeam

-

headlamps. 

Be sure to check your bulbs right away and replace them
if necessary.

See “Bulb Replacement” in the Index.

Driver Information Center 
(DIC) (Option)

Optional Sunroof version shown

The DIC will show information about the vehicle and
the surroundings. It is located in the headliner between
the sun visors.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments