manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 13 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 13

1-7

CAUTION:

If the seatback isn’t locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it 
is locked.

Easy Entry Manual Seat

The right front passenger seat is designed to make it
easy to get into and out of the rear seat.

1. Lift the latch on the back of the right front seat and

tilt the seatback forward. The seat will slide or can
be pushed forward to allow someone to get into or
out of the rear seat area.

2. Return the seatback upright to lock it. Slide the seat

fully rearward to lock it into its original position.

3. The front passenger must try to slide the entire 

seat back and forth to make sure the seat is locked
into place.

CAUTION:

If an easy entry right front seat isn’t locked, 
it can move. In a sudden stop or crash, the 
person sitting there could be injured. After
you’ve used it, be sure to slide the easy entry 
seat back and forth to be sure it is locked.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments