manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 111 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 111

2-47

Cruise Control (If Equipped)

With cruise control, you can maintain a speed of about 
25 mph (40 km/h) or more without keeping your foot on the
accelerator. This can really help on long trips. Cruise control
does not work at speeds below about 25 mph (40 km/h).

When you apply your brakes, the cruise control shuts off.

CAUTION:

D Cruise control can be dangerous where 

you can’t drive safely at a steady speed. 
So, don’t use your cruise control on
winding roads or in heavy traffic.

D Cruise control can be dangerous on

slippery roads. On such roads, fast changes
in tire traction can cause needless wheel
spinning, and you could lose control. 
Don’t use cruise control on slippery roads.

If your vehicle is in cruise control when the traction
control system (optional) begins to limit wheel spin, 
the cruise control will automatically disengage. See
“Traction Control System” in the Index. When road
conditions allow you to safely use it again, you may turn
the cruise control back on.

Setting Cruise Control

CAUTION:

If you leave your cruise control switch on when
you’re not using cruise, you might hit a button
and go into cruise when you don’t want to. 
You could be startled and even lose control. 
Keep the cruise control switch off until you 
want to use cruise control.

1. Press CRUISE ON/OFF

located on the steering
wheel to turn the cruise
control on.

2. Get up to the speed you want.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments