manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 199 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 199

3-36

When cleaning the cassette tape player with the
recommended non

-

abrasive cleaning cassette, it is

possible that the cassette may eject, because the cut tape
detection feature on your radio may recognize it as a
broken tape. To prevent the cleaning cassette from being
ejected, use the following steps:

1. Turn the ignition to ON or ACC.

2. Turn the radio off.

3. Press and hold the TAPE CD or the TAPE AUX

button for five seconds. READY will appear on 
the display and a cassette symbol will flash for 
five seconds.

4. Insert the scrubbing action cleaning cassette.

5. Eject the cleaning cassette after the manufacturer’s

recommended cleaning time.

When the cleaning cassette has been ejected, the broken
tape detection feature is active again.

You may also choose a non

-

scrubbing action, wet

-

type

cleaner which uses a cassette with a fabric belt to clean
the tape head. This type of cleaning cassette will not
eject on its own. A non

-

scrubbing action cleaner may

not clean as thoroughly as the scrubbing type cleaner.
The use of a non

-

scrubbing action, dry

-

type cleaning

cassette is not recommended.

After you clean the player, press and hold the EJT
button for five seconds to reset the CLEAN indicator.
The radio will display CLEANED to show the indicator
was reset.

Cassettes are subject to wear and the sound quality 
may degrade over time. Always make sure the cassette
tape is in good condition before you have your tape
player serviced.

Care of Your Compact Discs

Handle discs carefully. Store them in their original cases
or other protective cases and away from direct sunlight
and dust. If the surface of a disc is soiled, dampen a
clean, soft cloth in a mild, neutral detergent solution and
clean it, wiping from the center to the edge.

Be sure never to touch the side without writing when
handling discs. Pick up discs by grasping the outer edges
or the edge of the hole and the outer edge.

Care of Your Compact Disc Player

The use of CD lens cleaner discs is not advised, due to
the risk of contaminating the lens of the CD optics with
lubricants internal to the CD mechanism.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments