manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 84 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 84

2-20

TIRE MON (Tire Inflation Monitor Reset): This
feature allows you to reset the tire pressure monitor after
checking all tire pressures. See “Tires” in the Index. To
clear the LOW TIRE PRESSURE light from the
instrument panel cluster and reset the low tire pressure
monitor, do the following:

1. Scroll, using the SEEK PSCAN up or down arrows,

until TIRE MON appears on the display.

2. Press the 1 PREV or 2 NEXT button to enter the

submenu. RESET will be displayed.

3. Press the TUNE DISP button to reset. A chime will

be heard to verify the new setting and DONE will be
displayed for one second.

The low tire pressure monitor is now reset. You can
either exit the programming mode by following the
instructions later in this section or program the next
feature available on your vehicle.

LT DELAY (Delayed Headlamp Illumination): 
This feature allows the vehicle’s headlamps and parking
lamps to stay on for a fixed amount of time after you
exit the vehicle.

Programmable Modes

Mode 1: OFF 

--

 Turns feature off.

Mode 2: 30 SEC 

--

 30 seconds.

Mode 3: 60 SEC 

--

 60 seconds.

Before your vehicle was shipped from the factory, 
it was programmed to Mode 2. The mode to which 
your vehicle was programmed may have been changed
since it left the factory. To determine the mode to which
your vehicle is programmed or to program your vehicle
to a different mode, do the following:

1. Scroll, using the SEEK PSCAN up or down arrows,

until LT DELAY appears on the display.

2. Press the 1 PREV or 2 NEXT button to enter 

the submenu. The current selection will have an
asterisk (*) next to it. If you do not wish to 
change the current mode, you can either exit the
programming mode by following the directions later
in this section or program the next feature available
on your vehicle.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments