manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 366 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 366

7-19

Parking Brake and Automatic Transaxle PARK (P)
Mechanism Check

CAUTION:

When you are doing this check, your vehicle
could begin to move. You or others could be
injured and property could be damaged. Make
sure there is room in front of your vehicle in case
it begins to roll. Be ready to apply the regular
brake at once should the vehicle begin to move.

Park on a fairly steep hill, with the vehicle facing
downhill. Keeping your foot on the regular brake, 
set the parking brake.
D To check the parking brake’s holding ability: With

the engine running and transaxle in NEUTRAL (N),
slowly remove foot pressure from the regular brake
pedal. Do this until the vehicle is held by the parking
brake only.

D To check the PARK (P) mechanism’s holding 

ability: With the engine running, shift to PARK (P).
Then release the parking brake followed by the
regular brake.

Underbody Flushing Service

At least every spring, use plain water to flush any
corrosive materials from the underbody. Take care 
to clean thoroughly any areas where mud and other
debris can collect.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments