manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 150 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 150

2-86

Fuel Gage

United States 

-

 3400

V6 Engine Cluster

United States 

-

 3800

V6 Engine Cluster

Canada 

-

 3400 V6

Engine Cluster

Canada 

-

 3800 V6

Engine Cluster

The fuel gage, when the ignition is on, tells you about
how much fuel you have left in your tank.

The gage will first indicate empty before you are out of
fuel, and you should get more fuel as soon as possible.

Here are three situations you may experience with 
your fuel gage. None of these indicate a problem with
the fuel gage.
D At the gas station, the fuel pump shuts off before 

the gage reads full.

D It takes a little more or less fuel to fill up than the

fuel gage indicated. For example, the gage may have
indicated the tank was half full, but it actually took 
a little more or less than half the tank’s capacity to
fill the tank.

D The gage goes back to empty when you turn off 

the ignition.

D The gage pointer may move while cornering, braking

or accelerating.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments