Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 358

Page: 358 / 387

Scheduled Maintenance

7-11

50,000 Miles (83 000 km)

j Change automatic transaxle fluid and filter if the vehicle is mainly driven

under one or more of these conditions:

– In heavy city traffic where the outside temperature regularly reaches

_F (32_C) or higher.

– In hilly or mountainous terrain.
– When doing frequent trailer towing.
– Uses such as found in taxi, police or delivery service.

If you do not use your vehicle under any of these conditions, change the fluid
and filter at 100,000 miles (166 000 km).

52,500 Miles (87 500 km)

j Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation

pattern and additional information. (See footnote @.) (See fo.)

ACTUAL

SERVICED BY:

MILEAGE

DATE

ACTUAL

SERVICED BY:

MILEAGE

DATE

Summary of Contents for 2002 Monte Carlo



































































































































































































































































































































































































Search results

Summary of Contents for 2002 Monte Carlo

Reviews:

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 358 / 387

Search results

Summary of Contents for 2002 Monte Carlo

Reviews: