manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 86 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 86

2-22

FOB LIGHT (Remote Visual Verification): 
This feature allows the exterior lights to flash when 
the remote keyless entry transmitter is used to lock 
or unlock the vehicle.

Programmable Modes

Mode 1: OFF 

--

 Turns feature off.

Mode 2: ON 

--

 One flash for each remote lock/two

flashes for each remote unlock.

Before your vehicle was shipped from the factory, it was
programmed to Mode 2. The mode to which the vehicle
was programmed may have been changed since it left
the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:

1. Scroll, using the SEEK PSCAN up or down arrows,

until FOB LIGHT appears on the display.

2. Press the 1 PREV or 2 NEXT button to enter 

the submenu. The current selection will have an
asterisk (*) next to it. If you do not wish to 
change the current mode, you can either exit the
programming mode by following the directions later
in this section or program the next feature available
on your vehicle.

3. Scroll, using the 1 PREV or 2 NEXT buttons,

through the modes to change the current mode.

4. With your preference displayed, press the TUNE

DISP button to select. A chime will be heard to
verify the new setting. A new selection will be
displayed with an asterisk (*) for one second.

If your vehicle has the optional content theft

-

deterrent

system, the first time a remote UNLOCK command is
received, three flashes will be seen and three horn chirps
heard to indicate an alarm condition has occurred since
last arming. See “Content Theft

-

Deterrent System” in

the Index.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments