manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 152 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 152

2-88

Battery Life Indicator

When the vehicle is 
started this message 
will be displayed for 
three seconds.

If the message is displayed when the engine is running,
you may have a problem with your charging system. If
there is a problem with the charging system, four chimes
will sound when the message comes on. The battery
display will also stay on while the key is in ON until the
engine is started.

If the message stays on after starting the engine it could
indicate a problem with the generator drive belt, or some
other charging system problem. Have it checked right
away. Driving with this message on could drain 
your battery.

If you must drive a short distance with this message
displayed, it helps to turn off all your accessories.

Hot Coolant Temperature

United States

Canada

This message is displayed when the cooling 
system temperature gets hot. A chime will sound
continuously, also.

Check the coolant temperature gage and the coolant
level. See “Engine Coolant,” “Engine Coolant
Temperature Gage” and “Engine Overheating” in 
the Index for further information.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments