manualshive.com logo in svg

Chevrolet 2002 Monte Carlo, Owner'S Manual, Page: 22 / 387

Share
Download
Chevrolet 2002 Monte Carlo Owner'S Manual Download Page 22

1-16

Driver Position

This part describes the driver’s restraint system.

Lap-Shoulder Belt

The driver has a lap

-

shoulder belt. Here’s how to 

wear it properly.

1. Close and lock the door.

2. Adjust the seat so you can sit up straight. To see

how, see “Seats” in the Index.

3. Pick up the latch plate and pull the belt across you.

Don’t let it get twisted.

The shoulder belt may lock if you pull the belt across
you very quickly. If this happens, let the belt go back
slightly to unlock it. Then pull the belt across you
more slowly.

4. Push the latch plate into the buckle until it clicks.

Pull up on the latch plate to make sure it is secure. 
If the belt isn’t long enough, see “Safety Belt
Extender” at the end of this section.

Make sure the release button on the buckle is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

Summary of Contents for 2002 Monte Carlo




































































































































































































































































































































































































Reviews:

No comments