Ceyear 4041 Series User Manual Download Page 79

Page: 79 / 203

Chapter IV Spectrum Analyzer Mode

4.3.9

Mode menu

The default function mode in the mode menu is the Spectrum Analyzer mode, which, according to user

requirements, allows the addition of following function options: Interference Analyzer, AM/FM/PM analyzer,

Power meter, Channel scanner and field strength measurement.

中心频率

频率

扫宽

起始频率

终止频率

步进频率

自动

手动

Spectrum

Analyzer

Mode

Interference

Analyzer

AM/FM/PM

Analyzer

Power

Meter

Channel

Scanner

Field

Strength

·[Spectrum Analyzer]

: Press [Mode]→[Spectrum Analyzer] to select the Spectrum

Analyzer mode.

·[Interference Analyzer]

: Press [Mode]→[Interference Analyzer] to select the

Interference Analyzer mode. For detailed introduction, see Chapter 5 Interference

Analyzer Measurement Mode.

·[AM/FM/PM analyzer]

: Press [Mode]→[AM/FM/PM analyzer] to select the

AM/FM/PM analyzer mode. For detailed introduction, see Chapter 7 AM/FM/PM

analyzer Measurement Mode.

·[Power meter]

: Press [Mode]→[Power meter] to select the Power meter mode. For

detailed introduction, see Chapter 6 Power meter Mode.

·[Channel Scanner]

: Press [Mode]→[Channel Scanner] to select the Channel scanner

mode. For detailed introduction, see Chapter 8 Channel scanner Measurement Mode.

·[Field Strength Measurement]

: Press [Mode]→[Field Strength] to select the field

strength measurement mode. For detailed introduction, see Chapter 9 Field Strength

Measurement Mode.

4.3.10 Sweep menu

The sweep time specifies the time the spectrum analyzer takes with the local oscillator turned to sweep across a

selected frequency band. The sweep time directly affects the time cost to complete a test. It varies with the span,

RBW and VBW, In

‘

Auto

”

mode, the analyzer maintains the fastest sweep time possible with the selected

measurement settings. The

“

Manual

”

mode can be used to increase the sweep time to satisfy some specific

measurements.

The default sweep mode is linear sweep. The list sweep function is optional, which activates a continuous sweep

that consists of multiple frequency segments. It supports to edit, save and recall the list.

Summary of Contents for 4041 Series












































































































































































































Search results

Summary of Contents for 4041 Series

Reviews:

Brands by name

Popular brands

Ceyear 4041 Series, User Manual

Search results

Summary of Contents for 4041 Series

Reviews:

Brands by name

Popular brands