Ceyear 4041 Series, User Manual

Page: 138 / 203

Chapter IX Field Strength Measurement Mode (Option)
126
9.3.7 Sweep/Antenna Menu
Sweep Type
Cont Single
Swp/Ant
Sweep Once
Dwell Time
+
∞
Man
Stay Time
Off On
Recall Antenna >
Edit Antenna >
Save Antenna
·[Sweep Type Cont Single]: Press
【
Swp/Ant
】
→[Sweep Type Cont Single] to set the
continuous or single scanning mode.
·[Sweep Once]: Press
【
Swp/Ant
】
→[Sweep Once] to scan again.
·[Dwell Time +∞ Man]: Press
【
Swp/Ant
】 →[Dwell Time +∞ Man] to set the dwell
time which is the time for staying at the swept point at which the amplitude exceeds
the limit value when the limit switch is turned on. The default is infinite. The dwell
time can be manually set within the range of 1 ms ~ 40 s.
·[Special Attention]: The dwell time can be effective only when the limit switch is
turned on. When the dwell time is infinite, the value displayed on the main
interface is the one set manually because the infinite time is specially set and can’t
be displayed on the main interface.
·[Stay Time Off On]: Press
【
Swp/Ant
】
→[Stay Time Off On] to set the Stay Time
which is the time for the scanning to wait at each point. The default is Off. The stay
time can be manually set within the range of 1 ms ~ 40 s.
·[Special Attention]: The stay and dwell time can be effective only in the
frequency or list scanning mode.
·[Recall Antenna]: Press
【
Swp/Ant
】 →[Recall Antenna] to make the soft menus pop
up, including [Header], [Footer], [Page Up], [Page Down], [Recall] and [Delete]. The
saved antenna file can be selected and recalled.
·[Edit Antenna]: Press
【
Swp/Ant
】
→[Recall Antenna] to make the soft menus pop
up, including [Add Point], [Delete Point], [Delete All], [Done] and [Cancel]. It is used
to edit the antenna.
·[Save Antenna]: Press
【
Swp/Ant
】 →[Save Antenna] to open the dialog box of Save
Antenna to save the antenna file.